Basic Info.
| Grit |
80# 100#120#180#240#320#400#600# |
MOQ |
50 Meters |
| Length |
45mm≥100m |
Single Package Size |
(300-1400)*100*100mm |
| Leight |
45mm≥135mm |
Carton Size |
(300-1400)*300*300mm |
| Base size |
4.5/mm etc |
Sample |
Provide |
| Cut width |
0/3/5/8/10/15/20/30/50mm |
Advantage |
No Processing Contamination / Anti-Clogging Sandpaper /Durabl |
| Material |
AO Abrasive Cloth |
Name |
High Reliability And Cost-Effective Of The Sandpaper Brush For Wood |
| Base Material |
PE |
Origin |
China |
| Application |
Furniture/Wood/Steel/Door/Cabinet/Paint Surface |
HS Code |
9603509990 |
Product Description
High Reliability and Cost-Effective of The Sandpaper Brush for Wood
This sanding brush was made up with
Anti-Clogging abrasive sandpaper,
"O" Profile P base. sandpaper brushes and support strip brush each other combined use, so it's durable and easy to remove or replace with our O-ring system in the application, The surface of the abrasive is attached with an anti-clogging coating material, which is not easy to fill by waste chips. We use the most advanced die-cutting technology to ensure that the production process without waste gas, waste water discharge, die-cutting neat and clean no residue, will not cause damage to the abrasive, traditional laser cutting abrasive abrasive cutting edge is affected high temperature, material is too dry sand particles easy to fall off, the abrasives still have carbonized residue around the cutting edges,We devoted to abrasives many years, experienced in the field, with advanced automated production lines.
From paper sanding to horsehair sanding brushes, Shardlian has the right sanding abrasives for your next project. We work closely with manufacturers to ensure we always have the most innovative and high-quality products and more servce.
| Grit |
80# 100#120#180#240#320#400#600# |
| Length |
45mm≥100m |
| Leight |
45mm≥135mm |
| Base size |
Φ3.0/3.5/3.8/4.0/4.2/4.5/mm etc |
| Cut width |
0/3/5/8/10/15/20/30/50mm |
| Material |
A/O Coating Abrasive Cloth |
| Base Material |
PE |
| Application |
Furniture/Wood/Steel/door/Cabinet |
Advantages:
Our sanding strips are designed with a range of abrasives and sanding brushes including plant fibers, horsehair, pig hair, and synthetic fibers. Additionally, Shardlian is proud to be the manufacturer of the steel surface treatment market to offer wire brush inserts. We have done several different processes and materials, so all our sanding brushes and paper sanding brushes are easy to remove or replace with our O-ring system and more economical.
Our brushes also fit nearly any hub or track on the market. If our brushes don't fit your existing machine, we can make a hub to fit. No matter the material, we have a sanding abrasive option to get the job done with the precision and quality you're looking for.
Our top of the line abrasive offers the longest guaranteed life on the market. The Shardlian Abrasive is offered in Special Blend Cora A/O, Ceramic, Ceramic/Zirconium Blend, Silicon Carbide, Non-Woven, Grits available range from 80-1200. Standard Trim heights available are 45mm, 55mm, 60mm, 65mm, 70mm, 75mm, 85mm, 115mm, 135mm. Standard finger widths are 3mm, 5mm, 8mm, and no cut. The Shardlian brush is available with a Tampico, natural brown fiber, Poly Blend, Steel fiber Support brush.
Application:
Brush supported abrasive sanding strips combined with suitable grooved cylinders or discs make the perfect sanding tool for many applications in modern woodworking and metal working.
We offer a huge variety of different sanding strip brush and grooved cores. Therefore, the system is hugely flexible and versatile with over 1000 possibilities to create the perfect sanding head. With our experience, we will guide you to find the perfect brush sanding solution for your sanding task.
1. Sanding of profiled, flat and moulded components 2. Polishing of oil and wax
3. Sanding of wood, mdf and all types of coatings incl. UV 4. Improving of surface finish
5. Reducing of coating constumption 6. Deburring of laser-cut and punched sheet metal parts
7. Smoothening of sharp edges 8. Edge rounding of sheet metal parts
COMPANY INFORMATION:
Shardlian was founded in 2002 in Shenzhen by Jim Wang after years of finishing abrasive sandpaper brush/support sanding brush/sanding sponge and sanding discs, If you are looking for a time tested flexible sanding consumables, you can count on shardlian to be there for the long haul.
We have a 3000 square meter factory in Dongguan that provides abrasive services to about 500 enterprises at home and abroad. Our largest customers are panel furniture, 3C electronics and new energy vehicle manufacturers. Each month has received from different customers repurchase plans, but also from different new customers asking for technical problems and solutions, but in recent years we had also have deep cooperation with traders from Southeast Asia and other countries.
FAQ
Q1 The difference between die cutting and laser cutting in the actual application of sand.
| |
Advantages |
Disadvantages |
| cuLasertting |
1. Low cost of use.
2. No need to change the mold.
3. The cutting precision is high. |
1. The later maintenance cost is high, waste gas and wastewater treatment.
2. The processing efficiency is low and the actual application is not ideal.
3. High-temperature cutting causes the product itself to evaporate quickly, and the product structure changes.
4. Produce very toxic waste gas and waste water, causing serious pollution to the environment.
5. The ore grains cannot be cut,but the non-metallic components on the surface of the sand are burned, so Black carbides are likely to remain the cut marks, which will cause the surface of the plate to pollute.
|
| Die cutting |
1. No waste gas or waste water is produced, healthy earth every day.
2. High processing efficiency, ideal for practical applications.
3. There are no residues in the cut marks, which will not cause pollution to the surface of the board.
4. Non-destructive cutting products. Will not cause damage to the board.
5. Maintenance-free in the later .
|
1. The cutting accuracy is slightly lower, which is prone to product burrs and affects the appearance.
2. The use cost is slightly higher.
3. Need to replace different models of molds. |
Q2. Are you a manufacturer? Do you have a factory?
Answer: We are a professional manufacturer for more than 19 years and we have factories. Hope you have the opportunity to visit our factory. and hope you can give us some valuable advice.
Q3.Can I get samples for free? Is it possible to ship for free?
Answer:Yes, we can give you free samples after talking and confirming all the details. But we do not provide free shipping service,If you buy a lot of products, we will give you some discounts.
Q4. Do you do OEM?
Answer: Yes. We can design stickers with your logo.
Q5: What is your packaging solution?
Answer: First wrap a certain amount of products with PE film and put them in a separate small carton, then put more small cartons into the big carton, and then wrap the PE film again after packaging.
Q6. What is the delivery time?
Answer: According to the size and quantity, the delivery time is usually 5~10 days. When we know the product details, we can tell you the exact delivery time.
Q7: How do you ship the goods?
Answer:we can choose air, sea, land transport, efficient, economical, safe transport means.
Q8: Can your factory produce customized products?
Answer: Yes, we can customize according to your requirements for design, size, color and logo. Please contact us for more details.
Audited Supplier 
){kind=link}
){kind=link}